Quam ut solvere de auto-fluxus PHATOMENON de UV printer atramento?
{1. Quam ut solvere auto-fluxus Phaenomenon de UV printer atramento?
I, UV Procer Externae atramento cartridge ponitur princeps
Si externa atramento cartridge de UV printer est positus 50mm altior quam planum planum COLLUM, in atramento in atramento et fistula ex atramento {I}, in excelsis ink, et colore cross ' III {{{}} Si altitudo externa atramento cartridge in UV printer quod {{}} mm mm altior quam gradu ad COLLUM, quamvis non erit nec auto-fluxus PRUSTRIFICATUS in atramento {{VI}}
{2. externa atramento cartridge de UV printer est positus humilis
If the external ink cartridge of the UV printer is placed 300mm lower than the level of the nozzle, the ink in the ink delivery line will return to the external ink cartridge, and the air will flow back into the ink cartridge from the nozzle with the ink, and it is an external ink cartridge of the UV printer. The lower it is placed, the faster the air will enter, and the phenomenon of disconnection, backflow et crucem-color erit} {{III}}
{3. et sui-fluens Phaenomenon de UV typis prius considerandum utrum aedificatur-in atramento cartridges auctus in atramentum {{III}}
If the built-in ink cartridge of the UV printer is filled with too much ink, there is no air in it, and there is no siphon breakpoint, the ink delivery tube and the secondary ink cartridge are connected as a whole, even if the external ink cartridge of the UV printer and the secondary ink cartridge are in the same horizontal position, It will also cause the ink to flow slowly, and there will be disconnection and ink leakage
